Journal: Sensors (Basel, Switzerland)

Article Title: PD Flexible Built-In High-Sensitivity Elliptical Monopole Antenna Sensor

doi: 10.3390/s22134982

Figure Lengend Snippet: Calculation principle of elliptical radiation patch: ( a ) elliptical radiation patch principle; ( b ) cylindrical oscillator.

Article Snippet: In this paper, the three-dimensional electromagnetic simulation model of elliptical monopole antenna is established by ANSYS HFSS software 15.0, and the VSWR curves are shown in when the flexible antenna is not bent (0 mm) and when the bending radius is 100, 300, and 500 mm, respectively, in the frequency band of 300 MHz~3 GHz.

Techniques:

Journal: Sensors (Basel, Switzerland)

Article Title: PD Flexible Built-In High-Sensitivity Elliptical Monopole Antenna Sensor

doi: 10.3390/s22134982

Figure Lengend Snippet: Design parameters of Antenna.

Article Snippet: In this paper, the three-dimensional electromagnetic simulation model of elliptical monopole antenna is established by ANSYS HFSS software 15.0, and the VSWR curves are shown in when the flexible antenna is not bent (0 mm) and when the bending radius is 100, 300, and 500 mm, respectively, in the frequency band of 300 MHz~3 GHz.

Techniques:

Journal: Micromachines

Article Title: A Multi-Electrode Pixel Structure for Quick-Response Electrowetting Displays

doi: 10.3390/mi13071103

Figure Lengend Snippet: Pixel structure and operating principles of EWDs. The optical stack consists of a top plate, a glass substrate, indium tin oxide (ITO) electrodes, a hydrophobic insulator layer, pixel wall, colored oil, and water. ( a ) With an applied voltage, oil is shrunk to a corner and the pixel is in a white on-state. ( b ) With no voltage applied, oil spreads uniformly and the pixel is in a colored off-state.

Article Snippet: In this paper, a new pixel circuit structure with four sub-electrodes is proposed, and a three-dimensional dynamic simulation model of EWDs was established by COMSOL Multiphysics.

Techniques:

Journal: Micromachines

Article Title: A Multi-Electrode Pixel Structure for Quick-Response Electrowetting Displays

doi: 10.3390/mi13071103

Figure Lengend Snippet: The switch-on response curve of EWDs with a multi-electrode pixel structure. Oil ruptured in the area of sub-electrode 1 and moved rapidly toward the pixel corner. With the voltage applied to two adjacent sub electrodes, oil was further accelerated to move to the specified pixel corner. The oil ruptured at 0.7 ms and the pixel reached a maximum aperture ratio of 57.9% at 9.5 ms. It took only 4.7 ms to reach an aperture ratio of 50%.

Article Snippet: In this paper, a new pixel circuit structure with four sub-electrodes is proposed, and a three-dimensional dynamic simulation model of EWDs was established by COMSOL Multiphysics.

Techniques: